Eric's Improved Z Axis Coupler Rev3 (Q66891)

From Library of Open Source Hardware
Jump to navigation Jump to search
No description defined
Language Label Description Also known as
English
Eric's Improved Z Axis Coupler Rev3
No description defined

    Statements

    www.thingiverse.com
    0 references
    auto
    0 references
    en
    0 references
    1.0.0
    0 references
    thingiverse.com
    0 references
    https://spdx.org/licenses/CC-BY-4.0
    0 references
    **1/30/2021: Updated to support a 1/4" threaded rod. I haven't been printing a lot lately, but I had need for one of these. These should work for Prusa remixes. Good luck and I hope you find these useful. Created in Creo Elements. **5/19/2015 Updated EricCouplerRev3-5x5mm.stl for 5mm motor & 5mm threaded rod, M5 nut dimensions estimated. This should work for i3 machines and any other fine 5mm rods. let me know if the nut needs to be modified. **11/4/2013 v4.2, 6mm:** Beveled the unsupported edge for the 6mm nut, Beveled the m3 Nylock grub screw hole and narrowed it .2mm, for a tighter fit. Please let me know if you need any other mods. **9/1/2013 modded v4 ->4.1:** 6mm version for better 6mm nut fit and widened grub for a nylock nut. removed opposing grub and widened body to 22mm **8/26/13 Added 6mm and 8mm versions** Bridged with a second opposite grub on the 5mm motor shaft. **Coupler for Z Axis, Revision 3: ** Beefed up a little. Created in PTC Creo
    0 references
    0 references
    PharaohABQ
    0 references