Square Peg and Hole Fitment Test (Q66813)

From Library of Open Source Hardware
Jump to navigation Jump to search
No description defined
Language Label Description Also known as
English
Square Peg and Hole Fitment Test
No description defined

    Statements

    0 references
    https://spdx.org/licenses/CC-BY-4.0
    0 references
    auto
    0 references
    1.0.0
    0 references
    A test print to help you figure out how much clearance you need for two printed parts to fit into each other. The main peg is a 5mm x 5mm cube. The peg board has holes of the following dimensions: 4.8mm x 4.8mm 4.9mm x 4.9mm … 5.8mm x 5.8mm In my print, the 5.1mm x 5.1mm slot ( 0.05mm clearance per side) gave a good and very tight fit - perhaps for permanent connections. The 5.2mm x 5.2mm square (0.1mm clearance per side) gave a good generally-useful fit.
    0 references
    thingiverse.com
    0 references
    LeeroyLee
    0 references
    www.thingiverse.com
    0 references
    en
    0 references