WIMUv3 hinged square bar holder (Q61647)

From Library of Open Source Hardware
Jump to navigation Jump to search
No description defined
Language Label Description Also known as
English
WIMUv3 hinged square bar holder
No description defined

    Statements

    auto
    0 references
    en
    0 references
    thingiverse.com
    0 references
    https://spdx.org/licenses/CC-BY-SA-4.0
    0 references
    1.0.0
    0 references
    M_G
    0 references
    0 references
    Parametric hinged and bolted attachment for square bars This OpenSCAD script will generate a 2 part holder to attach a Tyndall WIMUv3 to the upright square cross-sectional posts on the moveable sled part of the assassin trainer at Bath University. The size of the bar it is attached to can be parametrically varied Version: 0.9 Date: 2012-05-31 Todo: - clean up code to make more parametric - test fit and adjust - add "wiggle" for bolts and captured nuts - add option to choose orientation of WIMU holder section - add optional corner fins to prevent thermal stress cracks when printing in black ABS Warnings: None Note: You will need to also have the modules mouse_ears_test.scad, pivot_1_0.scad and rounded_cuboid_v2.4.scad in the same directory or your library for this to compile correctly Changes from previous versions: 0.9 - added option to choose position of hinge/bolt holes along sides - added second captive nut section on side for tightening holder to bar 0.8 - added tolerancing for bar fit - added second bolt pivot 0.7 - added padding partial cutout between Z axis of wimu and front/top face of wimu holder - added variable for and increased pivot size around hinge pin to 5 - added extra mouse ears under wimu holder in attempt to prvent it from curling etc. - increased height of wimu by 0.8 mm as previously printed item despite having a nominal .stl measured height of 31.4 it measured only 30.2 when printed also note average height of 5 wimus measured was 31mm 0.6 - increased size of side holes to allow for viewing of status LEDs - changed the size of cutouts on WIMU holder section to help with removal of WIMU - added cutout under WIMU holder to help with removal of WIMU - added captive nut section for tightening holder to bar 0.5 - added WIMU packaging to check location of cutouts 0.4 - Adjusted position of cutouts around hinge and bolt clamp so that they dont go all the way through the wall to make for easier printing and drilling - Made hinge pin larger to make it easier to insert hinge pin without drilling 0.3 - Added option to add device holder on side or not using use_holder variable - Fixed large clamp part so that it has correct internal dimensions - Increased height of small cutouts on long side of WIMU hodler so that activity LED can be seen - added comments - Moved everything up onto the build plane - Fixed some translate issues where bar_stock_l and bar_stock_b were mixed up - Moved the hinge and bolt side cutouts so that a thin piece of material would connect the 2 halves - Moved the mouse ears into the union and differecne operations applied to the main clamp body 0.2 - reduced individual parts count by using the pivot module only twice and using cut lines to split it up 0.1 - First attempt
    0 references
    www.thingiverse.com
    0 references