Difference between revisions of "Square Peg and Hole Fitment Test (Q66813)"
Jump to navigation
Jump to search
(Reconciliation Edit) |
(Added [en] label: Square Peg and Hole Fitment Test) |
||
| label / en | label / en | ||
| + | Square Peg and Hole Fitment Test | ||
Latest revision as of 01:14, 26 February 2022
No description defined
| Language | Label | Description | Also known as |
|---|---|---|---|
| English |
Square Peg and Hole Fitment Test
|
No description defined
|
Statements
https://spdx.org/licenses/CC-BY-4.0
0 references
auto
0 references
1.0.0
0 references
A test print to help you figure out how much clearance you need for two printed parts to fit into each other. The main peg is a 5mm x 5mm cube. The peg board has holes of the following dimensions: 4.8mm x 4.8mm 4.9mm x 4.9mm … 5.8mm x 5.8mm In my print, the 5.1mm x 5.1mm slot ( 0.05mm clearance per side) gave a good and very tight fit - perhaps for permanent connections. The 5.2mm x 5.2mm square (0.1mm clearance per side) gave a good generally-useful fit.
0 references
thingiverse.com
0 references
LeeroyLee
0 references
www.thingiverse.com
0 references
en
0 references