No label defined (Q47454)

From Library of Open Source Hardware
Revision as of 17:32, 25 February 2022 by Aisberg (talk | contribs) (Reconciliation Edit)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
No description defined
Language Label Description Also known as
English
No label defined
No description defined

    Statements

    Vector_Mayhem
    0 references
    https://spdx.org/licenses/CC-BY-SA-4.0
    0 references
    www.thingiverse.com
    0 references
    0 references
    1.0.0
    0 references
    thingiverse.com
    0 references
    An issue with the Prusa X-carriage + Wades extruder combo is that the overhanging motor causes the bushings opposite the motor to be very lightly loaded, and if the bushings are loose, it can cause that end to lift/drop on direction change and chatter. In order to tighten things up long enough to print better replacement parts, I designed this bit. It attaches to the carriage using the extruder mounting screw as a stud, so it only works with Makergear or similar hot ends that leave that screw open. Original source file is from Solidworks 2011.
    0 references
    en
    0 references
    auto
    0 references