No label defined (Q36096)
Jump to navigation
Jump to search
No description defined
Language | Label | Description | Also known as |
---|---|---|---|
English |
No label defined
|
No description defined
|
Statements
en
0 references
A printable upgrade to allow increasing the tension on the X axis belt / pulley by turning a screw. Unlike the Y axis tensioner, ( http://www.thingiverse.com/thing:1618 ) the X axis tensioner only requires a single piece. The Sketchup file is included if you want to modify. Make sure your X pulley is assembled as shown to the left and is adjusted to the correct height so that the X belt is totally level all the way through ( http://wiki.makerbot.com/cupcake-xy-stage-installation#toc3 ). The tensioner may work if you have your pulley assembled differently, but you'll have to make sure the pulley doesn't rub against the tensioner. Special thanks to SSD ( http://www.thingiverse.com/ssd ) for testing and feedback. Version 3 has a slight change suggested by SSD which may help some people. If you're trying this for the first time, use Version 2.
0 references
MakerBlock
0 references
thingiverse.com
0 references
1.0.0
0 references
www.thingiverse.com
0 references
auto
0 references
https://spdx.org/licenses/CC-BY-4.0
0 references