No label defined (Q57936)
Jump to navigation
Jump to search
No description defined
Language | Label | Description | Also known as |
---|---|---|---|
English |
No label defined
|
No description defined
|
Statements
www.thingiverse.com
0 references
https://spdx.org/licenses/CC-BY-SA-4.0
0 references
auto
0 references
en
0 references
Cyberwizzard
0 references
thingiverse.com
0 references
After adjusting the tension on the X-axis belt for the zillionth time (to loose = lash, to tight = motor skip), I designed this little tension clamp. The clamp consists of 2 parts: one goes onto the carriage with the original 2x40mm bolts. The other part gets clamped on the belt with 2x20mm M4 bolts and 2 nuts. The 2 parts are joined with an 55mm M4 bolt and M4 nylok. After putting everything together, its a matter of tensioning a single bolt to modify the tension on the belt. No more unscrewing and re-fastening over and over again! Note: The orientation of the belt with this design is for the alternative X-axis where the teeth of the belt point inwards. Note 2: Photos of all parts plus mounted on the Mendel will come soon.
0 references
1.0.0
0 references