No label defined (Q51807)
Jump to navigation
Jump to search
No description defined
Language | Label | Description | Also known as |
---|---|---|---|
English |
No label defined
|
No description defined
|
Statements
https://spdx.org/licenses/GPL-3.0-or-later
0 references
auto
0 references
thingiverse.com
0 references
1.0.0
0 references
This is the final version of my X & Y tensioner. It is now a universal one usable on both Axis. It is slipped over the 4 bolts attaching the motor and utilizes the existing tension slots. You will need to drill one hole for each tensioner. The Y uses a 20mm 3M Bolt and the X uses a 16mm one. The X can be a tight fit for thickness, so I suggest you try your first one on the X, if it's too thick you can still use it on the Y. If you are looking for something that is more securely fastened down or you have issues with warping/pulling off the bolts, there are 2 other options that should fit the bill. The first alternative uses countersunk bolts and was created by Tunell: http://www.thingiverse.com/thing:11775/ The second is the derivative of this one by M_G that adds a layer of plastic under bolt: http://www.thingiverse.com/thing:14098
0 references
www.thingiverse.com
0 references
Gossamer
0 references
en
0 references