Locking Bearing Bracket for Makerbot Cupcake (Q35133)
Jump to navigation
Jump to search
No description defined
Language | Label | Description | Also known as |
---|---|---|---|
English |
Locking Bearing Bracket for Makerbot Cupcake
|
No description defined
|
Statements
www.thingiverse.com
0 references
This bracket is intended to be a printable replacement for the laser-cut brackets used for the threaded z-axis rods. The side-mount bolts pass through captive nuts to lock the bearing (608-style skate bearing) in place, removing the need for precisely aligning the nuts holding the bearing in vertical position on the threaded z-axis rods. It also may allow for easier removal of the z-axis rods themselves when combined with the revised U-shaped z-platform Small Makerbot Parts (thing:926). Note 1: My test ABS print is quite tight around the bearing so the inner radius may need to be increased by 0.1mm or so. Note 2: The 20090928 variant increases the inner radius surrounding the bearing by 0.5mm. A 1mm ring has been added to the top to strengthen the tear-drop, side-mount bolt holes. Note 3: Download the LaserCut variant if all you have is a laser cutter. Parts of the Cupcake design were used to design this part so License is inherited GNU GPL.
0 references
clothbot
0 references
https://spdx.org/licenses/GPL-3.0-or-later
0 references
thingiverse.com
0 references
en
0 references
auto
0 references
1.0.0
0 references