Replicator Extruder Wire Bundle Strain Relief Upgrade (Q69015)
Jump to navigation
Jump to search
No description defined
Language | Label | Description | Also known as |
---|---|---|---|
English |
Replicator Extruder Wire Bundle Strain Relief Upgrade
|
No description defined
|
Statements
www.thingiverse.com
0 references
https://spdx.org/licenses/CC-BY-SA-4.0
0 references
thingiverse.com
0 references
1.0.0
0 references
This is the first thing I've designed. It's a strain relief upgrade for my Makerbot Replicator I made using Autodesk 123D Beta. The Replicator shipped with a fairly fragile method of tethering the main wire to the extruder carriage and I found that I would have to frequently reattach it (it was a zip tie pulled over a screw head). Fed up with this design I made a clip which is held in place by the same screw which held the zip tie in place. I took special care to ensure that the screw remains in the same place as it did with the old strain relief solution. As soon as I get the chance I'm going to be adding a small channel to let the wires come out of the clip at the bottom so that it isn't pinching them as much when it's all screwed together.
0 references
auto
0 references
GeraldO
0 references
en
0 references