Prototype spool mounts for MendelMax (Q68238)

From Library of Open Source Hardware
Revision as of 01:43, 26 February 2022 by Aisberg (talk | contribs) (‎Added [en] label: Prototype spool mounts for MendelMax)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
No description defined
Language Label Description Also known as
English
Prototype spool mounts for MendelMax
No description defined

    Statements

    https://spdx.org/licenses/CC-BY-4.0
    0 references
    auto
    0 references
    Prototype spool mounts for MendelMax Most likely not the final version, I certainly welcome comments for improvements! Version 7! This version works pretty good. This version is a bit longer resulting in a more stable base for the spool. There are holes for #5 screws, but you don't need to use them. There are also holes to hold the bearings to the mount, but again you don't need to use them. Notes to me: consider making inner bearing hole a touch smaller, so it grabs #5s without needing a nut. Consider making shoulder a touch taller, so bearing has no chance of rubbing on the body of the mount. This configuration is gripping the frame very well without a bolt and remains easy to reposition - probably final version, don't mess with it! It works well.
    0 references
    Simonious
    0 references
    1.0.0
    0 references
    thingiverse.com
    0 references
    en
    0 references
    0 references
    www.thingiverse.com
    0 references