Tracked base for small robots (Q67857)

From Library of Open Source Hardware
Revision as of 01:35, 26 February 2022 by Aisberg (talk | contribs) (‎Added [en] label: Tracked base for small robots)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
No description defined
Language Label Description Also known as
English
Tracked base for small robots
No description defined

    Statements

    This is the smallest printable tracked base I was able to print reliably. It is designed as two independent mirrored halves, each one hosting it's reduction gearing, motor, etc. The only vitamins you need are motors and 4mm threaded rods, the rest is all printed or filament. The motors are the round type found in most CD-ROM/DVD-ROM drives to close/open the tray, so get your old drives and find a matching pair :) Important: keep the small screws keeping the motor in place you will need them. It's all designed in Blender so you get the .blend file for now, I'll add stl's at a later point.
    0 references
    https://spdx.org/licenses/CC-BY-4.0
    0 references
    en
    0 references
    tinhead
    0 references
    auto
    0 references
    0 references
    thingiverse.com
    0 references
    www.thingiverse.com
    0 references
    1.0.0
    0 references