3 mm Spanner for Bed Levelling Screws (Q54702)
Jump to navigation
Jump to search
No description defined
Language | Label | Description | Also known as |
---|---|---|---|
English |
3 mm Spanner for Bed Levelling Screws
|
No description defined
|
Statements
www.thingiverse.com
0 references
thingiverse.com
0 references
https://spdx.org/licenses/CC-BY-SA-4.0
0 references
julianh72
0 references
1.0.0
0 references
auto
0 references
I needed a couple of spanners to adjust the bed levelling screws on my Prusa Mendel. At first, I was going to download and print one, but then I decided to have a go at my very first real creation (from concept to physical print). I measured the M3 nuts with my digital callipers (5.4 mm across flats / 2.3 mm thick), and designed a spanner with an open end at one end and a hex ring at the other, using Alibre Design PE(Personal Edition). I increased the gap by 0.5 mm (to allow for plastic shrinkage, and to allow the spanner to fit over the nuts easily), and exported an STL file. I then printed a pair. They don't look too clean in the photo, but that is because my machine is brand new, and I am still learning how to optimise and calibrate it. I am sure there are many other 3 mm Spanners you can download, but this is my own design, and I am proud of it! I have uploaded the Alibre model file for those with Alibre PE who may want to modify the design; otherwise, just download the STL file.
0 references
en
0 references