Difference between revisions of "Camera Gantry (Q52074)"
Jump to navigation
Jump to search
(Reconciliation Edit) |
(Added [en] label: Camera Gantry) |
||
label / en | label / en | ||
+ | Camera Gantry |
Latest revision as of 19:41, 25 February 2022
No description defined
Language | Label | Description | Also known as |
---|---|---|---|
English |
Camera Gantry
|
No description defined
|
Statements
1.0.0
0 references
jman
0 references
I needed a way of holding a camera in a stable position for desktop photographing of various small items. A desktop tripod was not really working for me, so I designed this gantry (a bit derived from a traveling crane!) The camera can be held at a wide variety of orientations and heights, and then easily locked in place by tightening the knobs at either end. The whole thing collapses down flat to go in a cupboard. The non-plastic parts are four 12mm by 400mmm aluminium tubes, with caps on to avoid scratching and slippage, a piece of thick plywood 50mm by 350mm (in my case with some aluminium angle along the edges for reinforcement), two M6 * 65mm hex bolts with washers and nuts, four M4 * 25mm bolts with washers and nuts, and some foam for under the camera.
0 references
www.thingiverse.com
0 references
auto
0 references
en
0 references
https://spdx.org/licenses/GPL-3.0-or-later
0 references
thingiverse.com
0 references