Difference between revisions of "Lathe 3-Jaw Chuck Spacer for Short Stock - Spider (Q744757)"
Jump to navigation
Jump to search
(Reconciliation Edit) |
(Added [en] label: Lathe 3-Jaw Chuck Spacer for Short Stock - Spider) |
||
label / en | label / en | ||
+ | Lathe 3-Jaw Chuck Spacer for Short Stock - Spider |
Latest revision as of 10:26, 5 May 2022
No description defined
Language | Label | Description | Also known as |
---|---|---|---|
English |
Lathe 3-Jaw Chuck Spacer for Short Stock - Spider
|
No description defined
|
Statements
This is to space out short stock for turning or facing operations in a 3-jaw lathe chuck. It flexes over the jaws to take up 3/4" of space. There is a center hole which could be threaded for a stud/bolt to further space stock outward if needed and 3 holes for set screws for finer adjustment if needed for leveling (Magnets could be pressed into these to hold it to the body of the chuck). The center of this naturally takes up space so the minimum grip diameter possible is about 5/8" diameter. This is sized to fit jaws which are 3/4" wide and designed to flex and grip lightly. On a chuck with narrower jaws (I have tried it on a 5" chuck that had about 5/8" wide jaws) this is loose but does not rattle excessively at speed with a part against it. This shape is rather bizarre when viewed out of context but it works quite well on a 6" 3-jaw Chuck.
0 references
kencaid
0 references
1.0.0
0 references
thingiverse.com
0 references
en
0 references
auto
0 references
https://spdx.org/licenses/CC-BY-SA-4.0
0 references
www.thingiverse.com
0 references